Описание тепловизионной камеры распознавания лиц инфракрасный термометр
Машина измерения температуры опознавания стороны встроенный тепловизионный человеческий модуль измерения температуры, полностью автоматическое обнаружение температуры тела стороны и ультракрасная синхронизация измерения температуры сравнивать данные по базы данных стороны, вы можете быстро пройти в внеконтактном образе,автоматически произвести показатели посещаемости температуры тела, статистический анализ данных и отчеты и сформировать большие данные измерения температуры в первый раз.
Особенности измерения температуры распознавания лиц
- Распознавание лиц и определение температуры, бесконтактное безопасное
- Не носить маску, предупреждение о ненормальной температуре тела
- Генерирование в реальном времени записей температуры тела,управление данными и прослеживаемость в фоновом режиме
- Поддержка 4G, Wi-Fi, сетевой кабель и другие сетевые методы
Параметры продукта
Face Recognition Temperature Measure all-in-one Machine |
|||
Product model |
F2-H |
||
Characteristics |
Main function |
Face recognition temperature measurement |
|
Use environmen |
Indoor , semi-outdoor |
||
Color |
Silver |
||
Camera |
Type |
RGB |
Infrared |
Resolution |
2 million pixels |
2 million pixels |
|
Aperture |
F2.8 |
F2.8 |
|
Focal length |
3.18mm |
3.18mm |
|
Software Dynamic |
automatic |
automatic |
|
Vertical wide angle |
84° |
84° |
|
Horizontal wide angle |
54° |
54° |
|
Infrared supplement light |
Support |
||
White supplement light |
Support |
||
Core parameters |
Android |
Android7.1 |
|
CPU |
Quad-core, 1.8GHz |
||
storage capacity |
RAM 2G ROM 8G |
||
Human-comput er interaction |
Monitor |
8 inches, full viewing angle, 170 ° IPS LCD screen, resolution 800 * 1280 |
|
Touch screen |
support |
||
Face sensing module |
support |
||
Face temperature measurement module |
support,Serial / I2C interface |
||
Card reader |
Support, Optional |
||
Communication method |
Ethernet |
10/100 Ethernet |
|
WIFI |
Comply with IEEE802.11b / g / n standard (2.4G) |
||
Identification Method |
Face |
Support |
|
IC card |
Support, optional |
||
Input \ output interface |
RJ45 interface |
Support 10/100 Mbps |
|
Power supply interface |
DC12V-2A |
||
Power |
Adapter |
DC12V-2A |
|
Environmental requirements |
Operating temperature |
-20℃~60℃ |
|
Working humidity |
20%~90% (non-condensing) |
||
Static protection level |
IEC61000-4-2, LEVEL3 |
||
External Interface Definition |
|||
Type |
Interface |
Explanation |
|
USB |
USB 2.0 |
Support |
|
Ethernet port |
RJ45 |
10/100 Ethernet |
|
Relay |
NC COM NO |
Relay normal off/Common/normal on.Usually,door lock supply is positively connected to the COM port,and then according to the door lock type,relay power negatively connected NO port or NC port. Note: Maximum load of relay contact is 2A |
|
Gate sensor |
IN GND |
Check door open/close status, input |
|
Exit button |
PUSH1 GND |
Press the button,door opening control signal,input |
|
Serial |
RX TX |
RS232 |
|
Output power |
5V GND |
Support device external output 5V |
|
Wiegand |
WG_D1 WG_D0 GND |
Wiegand output interface, support 26bit / 34bit protocol |
|
Input power |
GND 12V+ |
Power input:12V DC |
|
Temperature measurement module |
Operating temperature |
0℃ ~ +55℃ |
|
Storage temperature |
-20℃ ~ +65℃ |
||
Power consumption |
< 0.3w |
||
Basic Parameters |
Pixel |
32*32 Real-time temperature output |
|
Measurement accuracy |
I + 0.5℃ |
||
Measuring distance |
0.3 ~ 0.7m |
||
WIFI |
2.4G 802.11b/g/n |
||
Bluetooth |
BluetooH4.0 |